Applications
- Web cleaning
- Electronics assembly
- Molding machinery
- Slitting, sheeting, winding
- Cleaning parts
- Shrink wrappers
- Package cleaning
- Printing equipment
- Benchtop assembly
Advantages
- Mountable, hands-free operation
- Rapid static decay
- Low voltage operation
- OSHA safe air outlet and noise level
- Meets OSHA pressure requirements
- LED indicators for proper and improper functionality
Varistat Specifications |
|
Certifications | The Varistat Ionizer is UL Listed, and RoHS and CE compliant |
Input Voltage | 120-240 VAC, 50/60 Hz - Selectable |
Input Current | .6 A/.4 A |
Emitter Voltage | 5-7 kV |
Balance | ±100V, manually adjustable to <10V |
Dimensions | 13 1/2 in. x 10 1/2 in. x 10 in. (342.9mm x 266.7mm x 254mm) |
Weight | 9.1 lbs (4.13 kg) |
Air Output | 10" x 1.5" (254mm x 38.1mm) - covers up to 16" x 10' (406.4mm x 3048mm) area |
Filter | Two replaceable foam filters, 30 ppi |
Static Discharge | 0.8 seconds to discharge 1000-100 V - measured 12" from charged area with fans at high speed |
Sound Level | 67 dBA measured 3' in front of unit with fans at high speed |
Indicator LEDs | Middle green LED indicates unit is on Blue LEDs indicate balance adjustment positive and negative Red LED (above green LED): 2 flashes - Electrical Failure 3 flashes - Control Board Malfunction 4 flashes - Fan Malfunction |
Varistat Benchtop Ionizer Dimensions |
||
Model | 8600 | |
![]() |
||
![]() |
How the Varistat Benchtop Ionizer Works |
|
![]() |
|
After connecting the 115V or 230V power cable, plug into outlet (1) and check to make sure the voltage selector switch (2) is set correctly; then activate power switch to activate static eliminating ions and airflow (3). A green light will indicate that power is turned on, improper functionality is indicated by a flashing red LED (4). Adjust fan speed with dial (5), and polarity with “+†and “-†buttons located on top (6). Adjust angle and height with knobs located on the side (7). Mounting bracket is included for hands-free operation (8). |
Blowoff Kit Standards and Certifications


EXAIR's Blowoff Kits comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.