The EXAIR Safety Air Nozzle with Stay Set Hose and Mag Base includes EXAIR's Flexible Stay Set Hose for applications where repositioning or aiming is required and a One or Two Outlet Magnetic Base for firm attachment to metallic machinery. EXAIR's High Power Safety Air Nozzle provides strong blowing force for applications requiring high thrust and velocity. It uses more compressed air than other air nozzles but is low when compared to typical blowoffs delivering the same force. Available in brass and Type 303 Stainless Steel.
| Product | Material | Flow | Air Inlet | Stay Set Hose Length | Number of Mag Base Outlets |
 |
Brass | 32 SCFM | 1/4 MNPT | 6" (152mm) | 1 |
 |
Brass | 32 SCFM | 1/4 MNPT | 6" (152mm) | 2 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 6" (152mm) | 1 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 6" (152mm) | 2 |
 |
Brass | 32 SCFM | 1/4 MNPT | 12" (305mm) | 1 |
 |
Brass | 32 SCFM | 1/4 MNPT | 12" (305mm) | 2 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 12" (305mm) | 1 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 12" (305mm) | 2 |
 |
Brass | 32 SCFM | 1/4 MNPT | 18" (457mm) | 1 |
 |
Brass | 32 SCFM | 1/4 MNPT | 18" (457mm) | 2 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 18" (457mm) | 1 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 18" (457mm) | 2 |
 |
Brass | 32 SCFM | 1/4 MNPT | 24" (610mm) | 1 |
 |
Brass | 32 SCFM | 1/4 MNPT | 24" (610mm) | 2 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 24" (610mm) | 1 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 24" (610mm) | 2 |
 |
Brass | 32 SCFM | 1/4 MNPT | 30" (762mm) | 1 |
 |
Brass | 32 SCFM | 1/4 MNPT | 30" (762mm) | 2 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 30" (762mm) | 1 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 30" (762mm) | 2 |
 |
Brass | 32 SCFM | 1/4 MNPT | 36" (914mm) | 1 |
 |
Brass | 32 SCFM | 1/4 MNPT | 36" (914mm) | 2 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 36" (914mm) | 1 |
 |
Type 303 Stainless Steel | 32 SCFM | 1/4 MNPT | 36" (914mm) | 2 |
Applications:
- Part cleaning
- Chip removal
- Liquid blowoff
- Part cooling
- Material conveying
- Part ejection
- Fiber conveying
- Air assist
Advantages:
- Reduced compressed air cost
- 10 dBA average noise reduction
- Conserve compressed air
- Improved blowoff performance
- Compact
- Improved safety
- Meets OSHA noise level requirements
- Meets OSHA pressure requirements
- Improved production
High Power Safety Air Nozzle Materials:
- Brass - general purpose applications. Maximum temperature 400°F (204°C).
- Type 303 Stainless Steel - high temperatures, corrosive environments. Maximum temperature 800°F (426°C)
Accessories:
Swivel Fittings - make it easy to adjust the aim of the Air Nozzles and Jets. Correct placement of the blowing angle can help optimize performance, reduce noise levels and improve efficiency. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 or 316 Stainless Steel.
High Power Safety Air Nozzle Performance |
|||||
| Air Consumption | Force* | Sound Level | |||
| Model | SCFM | SLPM | Lbs | Grams | dBA |
| HP1002 / HP1002SS | 32 | 906 | 1.8 | 816 | 87 |
|
*Force measured at 12" (305mm) from target Sound level measured at 3' (914mm) All measurements taken at 80 PSIG (5.5 BAR) |
|||||
How EXAIR Flat Super Air Nozzles Work
Compressed air flows through an inlet (1) into the plenum chamber of the Flat Super Air Nozzle. The flow is directed to a precise, slotted orifice. As the primary airflow exits the thin slotted nozzle (2), it follows a flat surface that directs the airflow in a perfectly straight line. This creates a uniform sheet of air across the entire length of the Flat Super Air Nozzle. Velocity loss is minimized and force is maximized as the room air (3) is entrained into the primary airstream at a ratio of 40:1. The result is a well defined sheet of laminar airflow with hard-hitting force and minimal wind shear.
High Power Safety Air Nozzle Dimensions and Airflow Pattern |
|
High Power Safety Air Nozzle Standards and Certifications
EXAIR High Power Safety Air Nozzles comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.
Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.
