Applications
- Part cleaning
- Chip removal
- Liquid blowoff
- Part cooling
- Material conveying
- Part ejection
- Fiber conveying
- Air assist
Advantages
- Reduced compressed air cost
- 10 dBA average noise reduction
- Conserve compressed air
- Improved blowoff performance
- Compact
- Improved safety
- Meets OSHA noise level requirements
- Meets OSHA pressure requirements
- Improved production
Materials
Type 316 Stainless Steel high temperatures, corrosive environments, and mechanical wear. Max temp 1000°F (538°C)
Accessories
Chip Shields - should be used to protect operators from flying debris.
|
| Extensions provide the necessary reach to clean out your pipe, tube, hose or channel. Available up to 72" (1829mm) long. | |
| Model | Description |
| 9492 | 6" (152mm) Aluminum, M4x0.5 |
| 9493 | 12" (152mm) Aluminum, M4x0.5 |
| 9495 | 24" (152mm) Aluminum, M4x0.5 |
| 9497 | 36" (152mm) Aluminum, M4x0.5 |
| 9188 | 12" (305mm) Aluminum, 1/4 NPT |
| 9189 | 18" (477mm) Aluminum, 1/4 NPT |
| 9190 | 24" (610mm) Aluminum, 1/4 NPT |
| 9191 | 36" (914mm) Aluminum, 1/4 NPT |
| 9192 | 48" (1219mm) Aluminum, 1/4 NPT |
| 9193 | 60" (1524mm) Aluminum, 1/4 NPT |
| 9194 | 72" (1829mm) Aluminum, 1/4 NPT |
| 900353 | 12" (305mm) Aluminum, 1 NPT |
| 901254 | 36" (914mm) Aluminum, 1 NPT |
| 901259 | 72" (1829mm) Aluminum, 1 NPT |
Back Blow Air Nozzle Performance | ||||
| Model | Air Consumption | Sound Level | Use with | |
| SCFM | SLPM | dBA | Inside Diameters | |
| 1004SS | 4.5 | 127 | 75 | 1/4" – 1" (6.3-25.4mm) |
| 1006SS | 22 | 622 | 80 | 7/8" – 4" (22-102mm) |
| 1008SS | 57 | 1,614 | 89 | 2" – 16" (51-406mm) |
How the Back Blow Air Nozzle Works |
 |
|
Air Nozzles use the Coanda effect to amplify compressed airflow up to 25 times or more. Back Blow Air Nozzles eject air from an annular ring of nozzles on the outer perimeter, as illustrated. The ring of nozzles eject air, back toward the air inlet at an angle to form a cone of high velocity air. The airstream that results is a high volume, high velocity blast of air at minimal consumption. The air is ejected safely and cannot be blocked, maintaining OSHA's dead end pressure standard. |
Back Blow Air Nozzle Dimensions & Airflow |
| Model 1004SS Back Blow Air Nozzle |
|
|
| Model 1006SS Back Blow Air Nozzle |
|
|
| Model 1008SS Back Blow Air Nozzle |
|
|
Back Blow Air Nozzle Standards and Certifications
EXAIR Back Blow Air Nozzles comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.
Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.