CECO Dean Pumps from John Brooks Company

pH Series Horizontal ANSI Process Pumps

An end-suction back pull out design, engineered to ensure long, continuous service life at low cost. The fully open impeller design provides smooth inlet passages for solids handling and stringy material, low NPSH, and minimum stuff box pressure. Manufactured in twenty-eight available sizes in ductile iron, 316 stainless steel, CD4MCu, and Alloy 20 materials.

Applications:  Chemicals | Petrochemicals | Power Plants | Pulp and Paper | Mining | Pharmaceutical | Food Processing | Wastewater

pH Series IOM Manual  |  pH Series DATA PAK

PH Series Self-Priming Chemical Process Pumps

Custom-Engineered to meet the demands of a wide range of chemical and industrial applications. Featuring excellent priming times, power frame interchangeability with the pH Series (ANSI) chemical process pumps, and suction lifts up to 20 feet, our pumps are designed to provide high reliability, optimal performance, and easy maintenance.

Applications:  Chemicals | Petrochemicals | Power Plants | Pulp and Paper | Mining | Pharmaceutical | Food Processing | Wastewater

pHP Series IOM Manual  |  pHP Series DATA PAK

M300 Series Magnetic Drive ANSI Chemical Pumps

Custom designed to efficiently meet your specific needs for a seal-less pump to handle hazardous toxic fluids. The CECO Dean M300 Series pump utilizes a synchronous drive system with permanent rare earth magnets to eliminate mechanical seals and virtually end pump shaft leakage, delivering optimal performance and efficiency for smooth operation. Each pump is corrosion-resistant and designed to meet the stringent requirements for seal-less pumps, as demanded by the process industry.

Applications:  Chemicals | Petrochemicals | Power Plants | Pulp and Paper | Mining | Pharmaceutical | Food Processing | Wastewater

M300 Series IOM Manual  |  M300 Series ANSI Dimensions & Performance

DeanLine Series Industrial Inline Pumps

Designed for process plant pump applications for capacities and heads less than ANSI AA and AB sizes. Manufactured for optimal performance and efficiency, delivering reliable and durable service for your application requirements. To ensure maximum operational performance, factory and hydrostatic testing is conducted, and each pump can be constructed in two sizes in cast iron or 316 stainless steel quality materials for corrosion-resistant durability.

Applications:  Transfer | Healthcare – Lime Water Circulation | Healthcare – Kidney Dialysis| Condensate | Pressure Boost | Soft Slurries | Paper Coating | Plating Solutions |  Heat Transfer Liquids | Sterilization | Tank Car Loading/Unloading | Pilot Plant Applications | Dye Liquors | Distilleries | Aquarium Water Circulation | Solvent Recovery Systems

DeanLine Series IOM Manual  |  DeanLine DATA PAK

DL Series High Temperature Inline Pumps

Designed for high temperature chemical process applications. With corrosion-resistant construction materials, space-saving configurations, and a close-coupled design that eliminates alignment issues, the DL Series High Temperature Inline Pump is engineered for maximum operational performance, reliability and durability for dependable service. The DL Series High Temperature Inline Pump offers simple installation and easy maintenance, while delivering maximum service life in seven available sizes and corrosion-resistant material construction.

Applications:  Chemical Processing | Refinery | Utility | Oil and Gas | Transfer

DL Series IOM Manual  |  DL Series DATA PAK

CNV Series Inline Process Pumps

Vertical inline, close-coupled process pumps designed to optimize efficiency, performance, and operating costs, while meeting standard environmental processes. Six available sizes to fit your application needs.

Applications:  Chemical Processing | Utility | Transfer | Filter Feed

CNV Series IOM Manual  |  CNV Series DATA PAK

RA Series Air Cooled Thermal Liquid/Hot Oil Pumps

Designed for high-pressure and high-temperature applications, providing efficient, reliable and dependable service for your specific application needs and meeting stringent environmental standards. The RA Series Pumps are cost effective, hot oil, thermal liquid, heat transfer pumps that feature a shaft mounted fan to provide air flow over the cooling fins of the pump. This air cooled thermal pump design eliminates the need for water cooling for the bearings and mechanical seals. With fifteen available sizes and corrosion-resistant construction.

Applications:  Hot Oil/Thermal Liquid | Heat Transfer | OEM Applications

RA Series IOM Manual | RA Series Brochure

Tandem Seal Option on the RA Series Air Cooled Pump

The RTA Tandem Seal (RTA) can be added onto the air-cooled Dean RA Series Pumps, which is known for high performance in mission-critical high-temperature, thermal fluid pumping applications. The RTA offers a secondary line of defense to contain any potential seal leakage. The RTA further enhances the benefits of the RA series air cooled pump by:

• Assisting with EPA compliance and Leak Detection and Repair (LDAR) regulations
• Increasing safety with added protection in order to avoid flammable fluids
• Helping our shared environment by protecting the community from leaks and potential long-term health exposure
• Reducing cost by preventing emissions from escaping from process equipment and therefore, saleable product

The RTA Tandem Seal RA Series Pumps include the air-cooled, shaft mounted fan that provides air flow over the cooling fins of the pump. This eliminates the need for external water cooling for the bearings and mechanical seal.

Applications:  Hot Oil/Thermal Liquid | Heat Transfer | OEM Applications

Tandem Seal Option Brochure

RWA Series Air Cooled Hot Water Pumps

Designed for heavy duty and high temperature applications, providing efficient, reliable and dependable service for your specific application needs and meeting environmental standards. The RWA Series pump is utilized for hot water, ethylene glycol, propylene glycol, and triethylene glycol, in boiler feed, steam condensate, HVAC and other heat transfer applications, and includes a shaft mounted fan to provide air flow over the cooling fins of the pump. This air cooled design eliminates the need for external water cooling for the bearings and mechanical seal. Thirteen available sizes with corrosion-resistant construction are available.

Applications:  Hot Water | Ethylene Glycol | Propylene Glycol | Tri-ethylene Glycol | Boiler Feed | Steam Condensate | HVAC | Heat Transfer | OEM Applications | Commercial – Hospitals – Universities – Laundries – Prisons

RWA Series IOM Manual | RWA Series Data PAK | RWA Series Brochure

RAV | RWAV Series Air Cooled Vertical Inline Thermal Liquid/Hot Water Pump

Custom engineered to deliver optimal performance, efficiency and reliability, and are ideal choices for boiler feed, steam condensate return, HVAC, heat transfer, hot oil, and hot water applications. Both RAV and RWAV Series pumps feature a shaft mounted fan to provide air flow over the cooling fins of the pump. This air cooled design eliminates the need for external water cooling for the bearings and mechanical seal. Our RAV and RWAV Series vertical inline pumps are designed to minimize alignment concerns and save space, and are available in six sizes with corrosion resistant construction.

Applications:  Hot Oil (RAV) | Hot Water (RWAV) | Ethylene Glycol (RWAV) | Propylene Glycol (RWAV) | Tri-ethylene Glycol (RWAV) | Boiler Feed (RWAV) | Steam Condensate (RWAV) | HVAC (RWAV) | Heat Transfer | OEM Applications | Commercial – Hospitals – Universities – Laundries – Prisons

RAV | RAW IOM Manual

RMA5000 Series Magnetic Drive Air Cooled Process Pumps

Seal-less, air-cooled or water cooled, heavy duty process pumps designed to provide efficient, durable and dependable service for your specific application needs, while meeting stringent environmental standards. The air fin cooling design reduces heat flow from process fluid to magnets, optimizing performance and reliability. Seventeen available sizes with corrosion-resistant construction are available.

Applications:  Chemical Processing | Petrochemicals | Power Plants | Plastics | Heat Transfer | Pharmaceutical | Food Processing

R4000 Series Heavy Duty Process Pump

Engineered for high-temperature heat transfer applications such as chemical processing, petrochemicals, power plants, plastics, pharmaceutical, food processing, and oil and gas. With premium quality construction materials, a closed impeller design, and centerline casing support to eliminate alignment issues, the R4000 Series is designed to provide long, continuous service life at low cost, optimizing performance, reliability and efficiency. Available in twenty-seven sizes, ensuring a custom solution for your application needs while meeting environmental standards.

Applications:  Chemical Processing | Petrochemicals | Power Plants | Plastics | Heat Transfer | Pharmaceutical | Food Processing | Oil and Gas

R4000 Series IOM Manual | R4000 Series DATA PAK

R5000 Series Heavy Duty API Type Process Pump

Designed for high-pressure and high-temperature applications including chemical processing, petrochemical, refinery, power plants, plastics, heat transfer, pharmaceutical, food processing, and oil and gas. Built with premium quality materials and a centerline casing support to eliminate alignment issues, the R5000 Series Heavy Duty API Type Process Pump is designed for optimal efficiency, performance, easy maintenance and a long service life at low cost. Constructed in steel or 316SS materials, and twenty-seven available sizes deliver reliable and dependable solutions to fit your specific application requirements while meeting stringent environmental process standards.

Applications:  Chemical Processing | Petrochemicals | Refineries | Power Plants | Plastics | Heat Transfer | Pharmaceutical | Food Processing | Oil and Gas

R5000 Series IOM Manual | R5000 Series DATA PAK